Bestway Flowclear Filter Pump – IAP086 | MyShop.LK
,

Bestway Flowclear Filter Pump – IAP086

Please contact 011 599 88 77 / 076 599 88 77, Before placing an Order.

  • 3 Months.

    LKR 5246.5
  • 6 Months.

    LKR 2685.7083333333
  • 12 Months.

    LKR 1380.3291666667
  • 3 Months.

    LKR 5246.5
  • 6 Months.

    LKR 2685.7083333333
  • 9 Months.

    LKR 1815.4555555556
  • 12 Months.

    LKR 1380.3291666667
  • 15 Months.

    LKR 1119.2533333333
  • 20 Months.

    LKR 854.43
  • 3 Months.

    LKR 5571.2833333333
  • 6 Months.

    LKR 2823.1166666667
  • 12 Months.

    LKR 1449.0333333333
  • 24 Months.

    LKR 761.99166666667
  • 3 Months.

    LKR 5471.35
  • 6 Months.

    LKR 2773.15
  • 12 Months.

    LKR 1442.7875
  • 24 Months.

    LKR 752.62291666667

Bestway Flowclear Filter Pump – IAP086

  • Capacity: 330 gal/hour
    280 gal/hour integrated flow rate
    Suitable for 1,100-8,300 L pools
    Comes with filter cartridge/all hoses and attachments

Bestway Flowclear Filter Pump P6112diagram

Bestway Flowclear Filter Pump P6680

Bestway Flowclear Filter Pump P61318

Operation

  1. Open/unscrew the Air Purge Valve (P6112) on the top of the Filter Pump; air is released as water fills the Filter Pump.
  2.  When water comes out of the Air Purge Valve (P6112) screw it closed and wipe away any water.
  3.  To start the Filter Pump, insert the plug into a residual current device (RCD).

IMPORTANT: DO NOT DRY RUN THE FILTER PUMP – Make sure both the pool’s Inlet and Outlet valves are fully covered by water before operating the Filter Pump.

Maintenance

CAUTION: YOU MUST ENSURE THE FILTER PUMP IS UNPLUGGED BEFORE ANY  MAINTENANCE OR STORAGE BEGINS OR SEVERE RISK OF INJURY OR DEATH EXISTS. 

  1.  Unplug the Filter Pump.
  2.  Loosen the Hose Clamps on the pool’s Inlet and Outlet Hoses by unscrewing the fly nut counter-clockwise.
  3. Remove Debris Screens from the inside of the pool.
  4.  Replace the Debris Screens with the Stopper Plugs in the pool’s Inlet and Outlet Valves.
  5.  Unscrew the Filter Cap Retainer and remove the Filter Cap.
  6.  Clean the Filter Cartridge with a garden hose, if the filter cartridge remains soiled or discolored, it is necessary to replace it with a new one.
  7. Insert the cleaned (or new) Filter Cartridge; ensure it is centered in the Filter Pump.
  8.  Check that the Filter Cap Seal is in place.
  9. Replace the Filter Cap and screw the Filter Cap Retainer into position.
  10.  Replace the Stopper Plugs with the Debris Screens in the pool’s Inlet and Outlet Valves. Tighten the Hose Clamps. Water will now flow to the pump.
  11. Follow PUMP INSTALLATION DIRECTIONS section to prepare the system for use.

IMPORTANT: For sanitary reasons we suggest replacing the Filter Cartridge with a new one every two weeks.

STORAGE

  1. Unplug the Filter Pump.
  2.  Follow the instructions as previously outline to stop water flowing to the Filter Pump and to remove the Filter Cartridge.
  3.  Discard the Filter Cartridge.
  4. Detach all Hoses.
  5.  Dry all components thoroughly.
  6.  Store the filter pump in a dry location out of child’s reach. Storage temperature: 4-40°C (39.2-104°F)
SKU: IAP086 Categories: ,